+8 Parts Menu

This section lists the parts specific to the +8 Model only. See the +4 Parts section for all other parts.

Click thumbnail for pop-up

Diag#	Part#	Description
1		LUCAS HEADLAMP ASSEMBLY
2		RIM SEAL
3		RIM c/w screw
4		RETAINING SCREW
5		BULB RETAINER c/w screw
6		RETAINER SCREW
7		RIM CLIP
8		RETAINER
9		BULB SEALED BEAM
		BULB PL
10		WIRE HARNESS
11		RUBBER SEAT
12		ADJUSTER KIT
13
14
15
16
17
18
19
20
21
22
23
24	208-490	PARK LAMP ASSEMBLY LATE
25	208-493	RIN AND LENS
26		BULB HOLDER SC
27		BULB SC
28		RIM SCREW
29	200-533	RUBBER BASE GASKET
30	200-490	PARK LAMP ASSEMBLY EARLY
31	NLA	RIM
32	200-493	LENS
33	200-687	BULB
34	200-497	RUBBER BASE
35	NLA	RETAINING SCREW
36
37
38	200-540	MARKER LAMP ASSEMBLY OEM LUCAS
	200-540A	MARKER LAMP ASSEMBLY REPRODUCTION
39	200-543	BASE GASKET
40	200-541	GLASS
41	200-687	BULB
45		REFLECTOR ASSEMBLY
46		MOUNT PLINTH PLASTIC
46	208-437A	MOUNT PLINTH POLISHED STAINLESS
		Fitting information on +8 rear lamps: Early Cars 1969 had #60 stop tail lamp fitted on the rear fender and #47 round signal lamp fitted flat on the rear deck. In 1970 the cars used #47 stop/tail lamp with #51 plinth mounted on the rear fender and #47 signal lamp mounted on #51 plinth on the rear deck.
46		REAR BACK UP LAMP ASSEMBLY (CLEAR)
47		REAR SIGNAL LAMP ASSEMBLY (AMBER)
47		REAR STOP/TAIL LAMP ASSEMBLY (RED)
48		LAMP BASE GASKET
49		LENS RED SIGNAL LAMP
49		LENS CLEAR BACKUP LAMP
50		BULB
51		PLINTH (PLASTIC)
51	208-432A	PLINTH (POLISHED STAINLESS STEEL)
52		PLINTH BASE GASKET
53		LENS GASKET
54	208-420	FRONT SIGNAL LAMP (AMBER)
55		LENS
56	208-435	RUBBER BASE
	208-435A	STAINLESS STEEL BASE
60		REAR STOP/TAIL LAMP ASSEMBLY
61		BASE GASKET
62		LENS GASKET
63		LENS
64		BULB